WIMBLEDON Generatori d’aria calda Tecnoclima

Keypoints

Range consisting of 2 models
Heating capacity from 41 to 232 kW
Air flow rate from 8.700 to 17.400 m3/h
High efficiency up to ~ 106%
Versions available for outdoor installation
Combined with a premix modulating burner for maximum efficiency
Gas fired
Compliant with ErP 2021 regulation and the regional requirements of Piedmont, Lombardy, Emilia Romagna, DM 26 June 2015 and tax deduction
The air heaters are supplied complete with accessories for frame-supported structures and air-supported structures

WIMBLEDON Condensing warm air heaters with premix modulating gas burner

for sports structures

Type

Hot

Supply

Gas

Thermal
power

from 41,0
to 232,0

Air flow

from 8.700
to 17.400

The WIMBLEDON series of warm air heaters, available in 2 models of 120 and 240 kW, are designed for heating and ventilation of sports structures supported by internal pressure (pressostructures or pressostatic structures) and of sports structures with a load-bearing structure (tensile, geodesic and traditional masonry structures).

Product informations

Description

External casing composed of: bearing frame in press-folded metal profile with robust corner joints in die-cast aluminium; detachable panels in pre-painted and/or powder-coated sheet metal access doors to technical compartments; openings for connection to the supply and recovery of treated air.

Heat exchanger (n° 2 heat exchangers for the model 240) made of AISI 430 stainless steel, with smoke pipes made of AISI 304 stainless steel with turbulence imprints, complete with inspection door, chimney connection and condensate discharge connection.

Ventilation unit (n° 2 fans for the model 240): consi- sting of a double-intake centrifugal fan, driven by a directly coupled electric motor and controlled by an inverter. Electrical control and protection equipment, standard 400V 50Hz 3N for three-phase motors, com- plete with safety double-thermostat (n° 1 with manual reset and n° 1 with automatic reset).

Modulating gas premix burner with Low CO and NOx emission (Class 5) with a wide modulation range including semi-radiant flame tube, modulating mixer and gas-air solenoid valve, DC brushless fan, ignition and ionization electrodes for flame control, electrical equipment and gas ramp.

Multifunctional electronic board for control and protection of the warm air heater: ambient temperature control, burner start up, flame supervision and safety functions.

Included accessories, specific for frame-suppor- ted structures (supplied disassembled): remote control panel, supply/return circular fittings, supply/return fire dampers, gravity expulsion damper, fresh air damper with manual control, rain hood.

Technical features

Description	U.M.	WIMBLEDON 120		WIMBLEDON 240
Description	U.M.	Frame-supported structure	Air-supported structure	Frame-supported structure	Air-supported structure
Max heating capacity input (burned)	kW	116,0		232,0
Max heating capacity input (burned)	kcal/h	99.760		199.520
Max USEFUL heating capacity output	kW	115,0		230,0
Max USEFUL heating capacity output	kcal/h	98.900		197.800
Min USEFUL heating capacity output	kW	43,0		43,0
Min USEFUL heating capacity output	kcal/h	36.980		36.980
Nominal air flow	Nm³/h	11.500		17.400
Max useful static pressure	Pa	150		350

NOTES:
• Warm air heaters are pre-set for natural gas. The kit for conversion to LPG is included.
• Units are designed to be installed outdoors. They are supplied complete with accessories (shipped disassembled for transport purposes), respectively for frame-supported structures and air-supported structures.

Dimensions

Model	Dimensions mm							Weight kg
Model	A	B	C	D	E	Ø outlet	Ø inlet	Weight kg
WIMBLEDON 120	1.950	1.740	950	931	526	640	490	650
WIMBLEDON 240	2.650	1.800	1.600	1.155	-	790	640	1.100

Supply description

WARM AIR HEATER consisting of:

Heat exchanger (n°2 heat exchangers for the model 240) made of AISI 430 stainless steel, with smoke pipes made of AISI 304 stainless steel with turbulence imprints, complete with inspection door, chimney connection and condensate discharge connection.
Outer casing composed of: bearing frame in press-folded metal profile with robust corner joints in die-cast aluminium; detachable panels in pre-painted and/or powder-coated sheet metal access doors to technical compartments; openings for connection to the supply and recovery of treated air.
Ventilation unit (n°2 fans for the model 240): consisting of a double-intake centrifugal fan, driven by a directly coupled electric motor and controlled by an inverter. Electrical control and protection equipment, standard 400V 50Hz 3N for three-phase motors, complete with safety double-thermostat (n° 1 with manual reset and n° 1 with automatic reset).
Modulating gas premix burner with Low CO and NOx emission (Class 5) with a wide modulation range, including semi-radiant flame tube, modulating mixer and gas-air solenoid valve, DC brushless fan, ignition and ionization electrodes for flame control, electrical equipment and gas ramp.
Multifunctional electronic board for control and protection of the warm air heater: ambient temperature control, burner start up, flame supervision and safety functions.
Included accessories, specific for frame-supported structures (supplied disassembled):
Remote control panel, supply/return circular fittings, supply/return fire dampers, gravity expulsion damper, fresh air damper with manual control, rain hood.
Included accessories, specific for air-supported structures (supplied disassembled):
Remote control panel, supply/return circular fittings, supply/return fire dampers, gravity expulsion damper, return air damper with manual control, fresh air gravity damper, rain hood.