Keypoints
- Range consisting of 3 models
- Heating capacity from 20 to 98 kW
- Air flow rate from 3.100 to 8.800 m3/h
- Versions available for indoor installation
- Suitable for direct diffusion via premounted diffusion plenum
- Oil fired
- Compliant with ErP 2021 regulation
- Double-stage oil burner with built-in tank and thermostat
- Plug-and-play warm air heater: simple to install and quick to start. Simply connect the power supply, set up the exhaust fumes and the air heater is ready to run
Warm Air Heaters
BA PLUS Warm air heaters for direct diffusion
with double-stage diesel oil burnerto 8.800
BA PLUS warm air heaters are the ideal solution for heating of small and medium-sized industrial environments such as workshops, laboratories, warehouses and so on, where direct diffusion of warm is requested, without duct diffusion system.
BA PLUS with built-in tank is the ideal solution for those looking for a reliable and easy-to-use heating system. Thanks to its "plug and play" design, installation of the warm air heater is quick and easy; simply connect the power supply and flue gas outlet and the unit is up and running in minutes. In addition, the built-in tank ensures autonomous operation and greater convenience.
Product informations
External casing in powder-painted steel, with thermal insulation, complete with protection housing for burner and oil tank (if present).
Heat exchanger with three smokes rounds; combu- stion chamber in stainless steel, smoke pipes in steel, complete with inspection doors, chimney connection and burner mounting plate.
Fan section with one centrifugal fan, equipped with an electrical motor, directly coupled to the fan wheel: sin- gle-phase for mod. BA 30-60 PLUS and three-phase for mod. BA 100 PLUS.
Electrical board for control and protection, designed for single- phase electrical supply 230V 50Hz 1N (for mod. BA 30-60 PLUS) and three-phase 400V 50Hz 3N (for mod. BA 100 PLUS), complete with FAN-LIMIT thermostats and a room thermostat.
Oil tank: BA 30 PLUS lt 75, BA 60 PLUS lt 90. Model BA 100 PLUS, for reasons of operating autonomy, must be connected to an external tank not included in the supply (available as an accessory, capacity lt 170).
Air outlet diffusion plenum with air delivery ope- nings on the four sides and horizontal individually adju- stable fins.
Low NOx double-stage forced draught oil burner complete with electronic devices, nozzle, flexible pipes and filter (if present). Single-stage burner available on request.
|
Description |
U.M. |
BA 30 PLUS |
BA 60 PLUS |
BA 100 PLUS |
|---|---|---|---|---|
|
Max heating capacity input (burned) |
kW |
31,0 |
63,9 |
97,7 |
|
kcal/h |
26.660 |
54.950 |
84.020 |
|
|
Max USEFUL heating capacity OUTPUT |
kW |
28,8 |
60,1 |
90,9 |
|
kcal/h |
24.770 |
51.690 |
78.180 |
|
|
Min USEFUL heating capacity OUTPUT |
kW |
18,8 |
40,2 |
61,3 |
|
kcal/h |
16.170 |
34.570 |
52.720 |
|
|
Nominal air flow |
Nm3/h |
3.100 |
5.500 |
8.800 |
|
Tank capacity |
l |
75 |
90 |
170 (*) |
(*) BA 100 PLUS, for reasons of operating autonomy, must be connected to an external tank not included in the supply (available as an accessory).
|
Model |
Dimensions mm |
Chimney Ø mm |
Weight kg |
Weight (with package) kg |
||
|---|---|---|---|---|---|---|
|
A |
B |
C |
||||
|
BA 30 PLUS |
1.020 |
500 |
1.600 |
120 |
145 |
157 |
|
BA 60 PLUS |
1.120 |
540 |
1.700 |
150 |
170 |
185 |
|
BA 100 PLUS |
1.400 |
760 |
2.000 |
180 |
275 |
295 |
WARM AIR HEATER consisting of:
- Heat exchanger with three smokes rounds; combustion chamber in stainless steel, smoke pipes in steel, complete with inspection doors, chimney connection and burner mounting plate.
- External casing in powder-painted steel, with thermal insulation, complete with protection housing for burner and oil tank (if present).
- Fan section with one centrifugal fan, equipped with an electrical motor, directly coupled to the fan wheel: single-phase for mod. BA 30-60 PLUS and three-phase for mod. BA 100 PLUS.
- Electrical board for control and protection, designed for single-phase electrical supply 230V 50Hz 1N (for mod. BA 30-60 PLUS) and three-phase 400V 50Hz 3N (for mod. BA 100 PLUS), complete with FAN-LIMIT thermostats and a room thermostat.
- Oil tank: BA 30 PLUS lt 75, BA 60 PLUS lt 90. Model BA 100 PLUS, for reasons of operating autonomy, must be connected to an external tank not included in the supply (available as an accessory, capacity lt 170).
- Air outlet diffusion plenum with air delivery openings on the four sides and horizontal individually adjustable fins.
- Low NOx double-stage forced draught oil burner complete with electronic devices, nozzle, flexible pipes and filter (if present). Single-stage burner available on request.
NOTES:
The burners are supplied equipped with safety and control devices foreseen by the supplier.
The BA PLUS warm air heaters can only be equipped with oil burner.
PACKAGE: Warm air heaters are wrapped in cardboard and pallet loaded.
