Warm Air Heaters
TC-DF High efficiency warm air heaters with down air flow outlet
Oil
to 36.000
High-efficiency heater TC series "down-flow" vertical version, gas or oil-fired, providing heating of air destined to treat mainly greenhouse structures, with a ducting system where it is required
diffusion through an air distribution system on the ground.
Product informations
The appliance essentially consists of by an insulated containment casing, combustion chamber made of AISI 430 stainless steel, heat exchanger made of AISI 430 stainless steel with a flattened tubular section and turbulator imprints that optimise heat exchange.
The unit, when connected to main ducts with secondary branches, allows localised heating at the base of the plants, with significant energy savings. The centrifugal fan with variable ratio transmission makes the unit suitable for installation in plants where high static pressures are required. The generator is complete with electrical command and control equipment and a specially shaped plenum for connection to ducts.
On request, all models are available in the construction version for operation with two-stage or flame modulation burners for supply air temperature control. This also allows maximum overall system efficiency.
Construction characteristics
- Cabinet - consists of a steel sheet supporting structure, with detachable closing panels internally lined with radiation-proof heat insulation and finely epoxy-painted.
- Fan group - includes one or more centrifugal double intake fans, statically and dynamically balanced, driven through a variable gear transmission by an electric motor complete with belt tightner.
- Electric equipment - for automatic or manual fan control and for the emergency stopping of the burner in case of air overheating. Inclusive of electric switchboard and FAN-LIMIT double thermostat.
High-efficiency heat exchanger
- Combustion chamber - made of AISI 430 18% chromium INOX stainless steel, flame-inversion model with low thermal load, cylindrical or ellipsoidal, perfectly cooled in all of its points.
- Exchange elements - made of AISI 430 18% chromium INOX stainless steel plate exhaust flues, flat tubular sections, with swirl impressions for maximum thermal efficiency.
- Exhaust manifold - front and rear, made of AISI 430 18% chromium INOX stainless steel, with wide inspection doors for rational and easy cleaning.
|
Description |
U.M. |
Model |
|||
|---|---|---|---|---|---|
|
TC-DF 190 |
TC-DF 255 |
TC-DF 390 |
TC-DF 590 |
||
|
Max nominal heating capacity input (burned) |
kW |
190,0 |
258,8 |
391,0 |
590,0 |
|
kcal/h |
163.400 |
222.568 |
336.260 |
507.400 |
|
|
Max USEFUL heating capacity output |
kW |
168,2 |
230,3 |
347,6 |
523,2 |
|
kcal/h |
144.652 |
198.058 |
298.936 |
449.952 |
|
|
Nominal air flow |
Nm3/h |
12.500 |
16.000 |
23.500 |
36.000 |
|
Useful static pressure |
Pa |
150 |
150 |
150 |
150 |
|
Model |
Dimensions mm |
Chimney Ø mm |
Weight Kg |
Weight (with package) Kg |
||||
|---|---|---|---|---|---|---|---|---|
|
A |
B |
C |
D |
E |
||||
|
TC-DF 190 |
1.300 |
900 |
2.120 |
1.000 |
3.120 |
200 |
535 |
555 |
|
TC-DF 255 |
1.500 |
1.000 |
2.120 |
1.000 |
3.120 |
250 |
625 |
650 |
|
TC-DF 390 |
1.700 |
1.200 |
2.350 |
1.320 |
3.670 |
250 |
835 |
865 |
|
TC-DF 590 |
2.090 |
1.270 |
2.870 |
1.370 |
4.240 |
350 |
1370 |
1400 |
WARM AIR HEATER consisting of:
- Heat exchanger with three smokes rounds, complete with combustion chamber and smoke pipes made of AISI 430 stainless steel, inspection doors, chimney connection and burner mounting plate.
- External casing in pre-painted galvanized steel with thermal insulation.
- Fan section with one or two centrifugal fans, complete with electric motor(s) and variable belt transmission.
- Electrical board for control and protection of the warm air heater designed for 400V 50Hz 3N three phase electrical motor, complete with FAN-LIMIT double-thermostat (n° 1 with manual reset and n° 1 with automatic reset) for TC-DF 190/255/390 models or with FAN-LIMIT double-thermostat (n° 1 with manual reset and n° 1 with automatic reset) and a safety FLOW SWITCH for insufficient air flow control for TC-DF 590 model.
- Bottom air outlet plenum with two circular duct panels for the connection of the polyethylene sleeve.
- Support frame.
- For oil burner version: single stage forced draught oil burner complete with electric device, nozzle and flexible pipes.
- For gas burner version: single stage forced draught gas burner complete with electric device and gas train.
NOTES:
• The gas trains for burners are designed to work with normal supply pressure (20 mbar for natural gas and 30 mbar for LPG).
• The burners are supplied equipped with safety/control devices and usual supply accessories foreseen by the supplier.
• The burners are supplied disassembled and in separate packages. They have to be mounted, connected and set on site by the customer.
DELIVERY: Ex works our factory.
PACKAGE: Warm air heaters are wrapped in plastic film and pallet-loaded. Accessories are protected in cardboard or plastic film.
